Will Your Largest Plates Fit? Checking a Dishwasher’s Interior Before Buying - Al Thahani Furniture

Will Your Largest Plates Fit? Checking a Dishwasher’s Interior Before Buying

Bring your largest everyday plate when viewing a dishwasher. It should sit securely in the rack, leave the spray arms free to turn and allow the door to close without pressure. Then check whether your glasses and bowls still fit alongside it. That practical test tells you more than an empty interior or a headline capacity figure.

For a used dishwasher, inspect the actual baskets and adjustment mechanisms too. Missing wheels or damaged supports can change how dishes sit inside.

Measure the plates you actually use

Measure a round plate across its widest point, including the rim. For oval platters, record both length and width; for square plates, include the diagonal because a corner may become the highest point when loaded.

Also note the depth. A shallow dinner plate and a deep pasta plate with the same diameter may need different spacing between the rack’s prongs, often called tines. Thick rims can make neighbouring plates touch even when there is enough height.

Pack one large dinner plate, a deep plate and a tall everyday glass for the viewing. If you regularly use a serving platter for family meals, bring that too. Check that these items are dishwasher-safe before treating machine washing as a buying requirement.

Check the model’s plate limit separately from capacity

A place-setting count describes overall loading capacity; it does not promise room for your particular dinnerware. Likewise, external width tells you about installation space, not the clearance above an upright plate.

When browsing used dishwashers in Abu Dhabi, shortlist suitable machines, then ask for the exact model number and its loading instructions. Look for maximum plate diameter and any conditions attached to that figure, such as a raised upper basket or a specific loading position.

Treat a missing plate-size specification as something to verify physically. Do not assume that every full-size machine has the same usable interior.

Test how the plate sits between the tines

With the appliance switched off and stable, place your largest plate in the lower basket according to the model’s loading arrangement. Let the rack support it naturally. Avoid forcing a thick rim into a narrow slot or balancing a plate on top of the prongs.

Add a second plate beside it. Both should remain supported with space for water to reach their surfaces. Move the basket slowly along its runners and check whether either plate slips or knocks against its neighbour.

If the plate only fits at an angle, check that the instructions allow that arrangement. Count how many slots it occupies: an acceptable occasional compromise may become frustrating with every evening meal.


Check spray-arm movement and door clearance

Push both baskets fully into their normal operating positions. Gently turn the accessible rotating spray arms by hand, following the appliance instructions. Pay particular attention to the arm beneath the upper basket, which may pass directly over tall plates below.

Watch the entire rotation. An arm might clear the plate in one position and strike its rim elsewhere. Also check that nothing projects through the lower basket into the bottom arm’s path. Never bend an arm or force it past an obstruction.

Close the door slowly. Stop if you feel the load resisting; a plate should not press against the inner door or seal. Check the detergent dispenser’s position as well. A large platter must leave its lid and detergent-release area unobstructed.

There is no single clearance measurement suitable for every dishwasher. Use the model’s limits and confirm free movement with your actual dishes loaded.


Raise the upper basket and check what space you lose

An adjustable upper basket can create more room for large plates underneath. Ask the seller to demonstrate the mechanism, preferably with the basket empty unless its instructions permit adjustment while loaded.

Check that the supports lock securely and that the basket slides back into position. Follow the manual on whether both sides must remain level or whether different heights are permitted. Where the basket connects to a rear water feed, confirm that it engages correctly after adjustment.

Now try your tall glass in the upper basket. Raising this basket reduces its overhead clearance, particularly beneath a separate cutlery tray. The useful setting is one that accommodates the dishes you need to wash together.

Try a realistic load before accepting the fit

Leave the large plates in place and add representative bowls, mugs and cutlery storage. Keep the cutlery basket in an approved position during this test; removing it can create an unrealistic impression of available space.

Fold-down tines can help with wide dishes, but they change the support available for neighbouring items. Check that the remaining load stays secure and that plates do not overlap or shield one another from the spray.

Think about frequency. Hand-washing an oversized celebration platter occasionally may be acceptable. Having to leave half your everyday plates out of every load is a much bigger compromise.

Inspect the parts that keep a used rack aligned

Look along the basket for missing wheels, bent wire, cracked clips and peeling coating. Check tine tips and joints for exposed metal or rust. A basket that catches, tilts or sags needs attention before you rely on its clearance.

Test adjustable supports and folding sections for secure engagement. Compare the supplied baskets, cutlery holder and removable inserts with the model’s instructions, especially if anything looks replaced or incomplete.

Ask about the availability and cost of the correct replacement parts in the UAE before accepting damage. A dry loading check establishes fit; it does not prove that the pump, heater or wash cycle works. Request a separate operational demonstration where possible.

Ask for specific evidence when buying remotely

If you cannot inspect in person, contact Al Thahani Furniture with your plate measurements and the listing you are considering. Ask whether the team can provide photographs showing the lower basket, the upper basket’s height setting and any damaged rack parts.

A video of a similarly sized plate loaded, the spray arm turning freely and the door closing is more useful than a photograph of an empty tub. A tape measurement should start from where the plate rests in the rack, not the dishwasher floor. Keep the agreed configuration with your order details.

Frequently asked questions

Will a 31 cm dinner plate fit every full-size dishwasher?

No. Maximum diameter depends on the model, basket position and loading arrangement. Check its instructions and test the plate.

Can I use a cardboard template instead of bringing a plate?

A template can help check outline clearance, but it cannot reproduce rim thickness, weight or stability between the tines.

Can I remove the upper basket to fit a large platter?

Only if the instructions explicitly allow operation that way. Some models require special accessories or settings; others require the basket to remain fitted.

Does a dishwasher with a cutlery tray offer more plate space?

It may free lower-basket space otherwise occupied by a cutlery basket. It does not automatically increase maximum plate diameter.

Is a plate that just brushes the spray arm acceptable?

No. Reposition the plate or use an approved basket adjustment. The arm must rotate without touching the load.

Back to blog